orange Huawei REV series 2hp commercial air blower, side view

Air Blowers & Anchors

2hp Commercial Air Blower for Inflatables (REV Series)

$375.00 AUD

The Huawei REV-2E is the big-inflatable blower in the flagship REV commercial series — 2130W and 1700 Pa of pressure for large inflatables of 30–45 m³, from 6 m+ cinema screens to large constant-air structures.

  • 2130W (2hp), airflow 650 m³/h
  • 1700 Pa pressure — suits inflatables 30–45 m³
  • UL, CE and CB certified
  • Stackable up to 4, with built-in cable winding

Buy online for delivery Australia-wide, or request a tailored quote — we’re happy to spec a package for your site.

Overview

The Huawei REV-2E is the big-inflatable option in the flagship REV commercial series and the successor to our REH-2E. Delivering 2130 watts, 1700 Pa of pressure and 650 m³/h of airflow, it's sized for large inflatables of 30 to 45 cubic metres — 6 m+ cinema screens and large constant-air structures — with pressure headroom to spare on exposed sites.

More Pressure From Less Power – The REH-2E Successor

The REV-2E delivers its 1700 Pa and 650 m³/h from a 2130W motor — 270 watts less than the 2400W REH-2E it replaces — and comes in at 16.2 kg net against the older unit's 16.6 kg. Less draw on the circuit, less weight in the van, no compromise on hold-up.

Built for the Road – Blow-Moulded Shell, Stackable, Cable Winding

The hollow blow-moulded shell with an optimised air intake shrugs off event-site handling, and units stack up to four high for transport and storage. Built-in cable winding keeps the 5 m cord tidy between jobs instead of tangled in the trailer.

Stable Power, Upgraded Protection

The motor runs stable across a wide voltage range and carries upgraded safety protection, certified to UL, CE and CB standards. Note that 2130W is a heavy single-circuit load — run the blower on its own dedicated 10 A circuit rather than sharing with your projector or audio.

Specifications

Specifications

Power
2130W (2hp)
Pressure
1700Pa
Flow
650m³/h
Suits inflatables
30–45 m³
Dimensions
475 × 351 × 449 mm (l × w × h)
Net weight
16.2kg
Power cord
5 m, 10 A plug, 220–240V 50Hz
Certifications
UL, CE, CB

Frequently asked questions

How is the REV-2E different from the REH-2E it replaces?

It delivers 1700 Pa and 650 m³/h from a 2130W motor, where the REH-2E drew 2400W — so less load on the circuit for the same job — and it's slightly lighter at 16.2 kg against 16.6 kg. It also adds the REV series' blow-moulded shell, stacking up to four high and built-in cable winding, and carries UL, CE and CB certification.

When should I choose the 2hp over the 1.5hp REV blower?

Choose the 2hp for large inflatables of 30–45 m³ — cinema screens of 6 m and up, or large constant-air structures. Its 1700 Pa of pressure also gives you headroom on exposed, windy sites where the screen needs to hold firm. For smaller inflatables, the 1.5hp REV blower is the better match.

What power supply does it need?

A standard Australian 240V outlet — it runs on 220–240V 50Hz with a 10 A plug and a 5 m cord. At 2130W it's a heavy single-circuit load, so run it on a dedicated 10 A circuit and keep the projector and audio on a separate one. Avoid lightweight daisy-chained extension leads.

Planning an outdoor screen or LED installation?

Tell us about your site and audience. We scope, supply and support outdoor cinema and permanent LED systems Australia-wide.